Inserting Points With Attributes

If the option to "Add Point Attributes" is enabled when manually inserting points into a Model.  Then after the point is located, a similar dialog to that above will appear.

The code can be changed if needs be or the definition of the code can be changed by clicking the ... button just after the code field.

Likewise comma codes can be added or removed by typing them in, or via the ... button. Turned on and off from a selection.

Remarks are entered in the field provided.  Note that they are remembered, so this box may need to be cleared if the contents are no longer relevant.

The Dimensions section is where attributes predefined on the Code, are available to be added.  Three defaults are provided which can be changed at any point while this dialog box is shown.

1. Entered Values - Here the previously entered attribute values for that code will be offered.
2. Default Values - Here, the default values for the attributes as defined under the Fields tab for the current code will be offered.
3. No Dimensions - Here no attributes will be added to the point.