CAD Circles

Circles will be generated honouring the current Layer, Colour, Style and Lock settings.

• Construct Centre Radius - Generates a Circle by manually indicating a centre point, then a second to control the Radius. 
• Construct Start End Radius -  Generates a Circle by manually indicating a centre point, then entering a radius via input box that prompts for a value.
• Construct Diameter - Generates a Circle by manually indicating the opposite sides of the new Circles diameter.
• Three Point - Generates a Circle by manually indicating three points which the new Circle must go though.

• Concentric Sketched -  Creates a new concentric copy of an indicated Circle, the radius of which is manually defined by indicating with a mouse.
• Concentric Single - Creates a new concentric copy of an indicated Circle, the radius of which is manually defined by entering a number into a Parallel Offset box that prompts for a value.
• Concentric Multi - Allows multiple copies of a selected Circle to be generated by specifying predefined offsets via the Parallel Spacing dialog.

• Modify Break - Converts a selected Circle into an Arc by specifying start and end points in an anticlockwise direction.
• Modify Radius - Modifies the radius of a selected Circle by entering a new value into a dialog box that prompts for a new value.

For details on Circle Construction options, see here.