Rectangles will be generated honouring the current Layer, Colour, Style and Lock settings.
- Rectangle Normal - Creates a rectangle square to the XY axis by manually defining the top right and bottom left corners.
- Rectangle Centred - Creates a rectangle square to the XY axis by manually defining the centre point and its top right corner.
- Rectangle Vt Centred - Creates a rectangle square to the XY axis by manually defining the middle of either the left or right hand side, followed by the opposite top corner.
- Rectangle Hz Centred - Creates a rectangle square to the XY axis by manually defining the middle of either the base or top side, followed by the opposite top\bottom corner.
- Rectangle Three Point - Creates a rectangle manually defined by three points. The first two define one side, whilst the third sets the height. This allows a rectangle to be defined with any orientation and size.
- Rectangle 2Pts & Width - Creates a rectangle square to the XY axis by first manually defining the height with two points, and then its direction and width via a third.
- Square Normal - Creates a square adjacent to the XY axis by manually defining the top right and bottom left corners.
- Square Centred - Creates a square adjacent to the XY axis by manually defining the centre point and its top right corner.
- Square Vt Centred - Creates a square adjacent to the XY axis by manually defining the middle of either the left or right hand side, followed by the opposite top corner.
- Square Hz Centred - Creates a square adjacent to the XY axis by manually defining the middle of either the base or top side, followed by the opposite top\bottom corner.
- Square Three Point - Creates a square manually defined by three points. The first two define one side, whilst the third sets the side two which the square should be drawn. This allows a square to be defined with any orientation and size.
- Concentric Sketched - Creates a single parallel copy of a rectangle or square, whos size is defined in realtime by selecting a location on screen to stretch or shrink it about.
- Concentric Single - Creates a single parallel copy of a rectangle or square, whos size is defined my entering a manual offset to stretch or shrink it about.
- Concentric Multi - Creates multiple parallel copies of a selected rectangle or square based on manually inputted spacings and counts.
- Explode - Converts a selected rectangle or square into a four straight line segments.
- Copy Backcloth - Copies an indicated rectangle or square from a backclothed CAD model into the current one.
Comments
0 comments
Please sign in to leave a comment.